Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 60 Next »

It is possible to connect XperienCentral to one or more external databases. The word ‘external’ is used to indicate that it is different from the internal database: The database that maintains XperienCentral’s internal content & administration. It is possible that the tables with external data are located in the same database as XperienCentral’s internal tables.

Because XperienCentral can be connected to other databases, it is, for example, possible to request data from the back office and show these on the website.

In This Topic

 


Use of Queries

Views on Database Content

By means of queries you can configure views on database content.

 

 

 

Overview Versus Detail View

You can view database content on two levels:

  • The overview level shows a list of records from the database.
  • The detail view level shows one specific record when it is selected.

In the screenshot above, the upper part shows an overview and the lower part shows a detail view. Note that you can also place the detail view on a different (special) page.

Sorting by Column

For the overview level, you can sort by column by clicking on a column heading which toggles the sorting between ascending and descending order. For each column in the overview, you can enable or disable column sorting separately.

Query Definitions

Queries are defined using SQL (Structured Query Language). The information returned from the database can then be shown on the website. The following is an example of an SQL query:

SELECT <fields> FROM <tables> WHERE <conditions> ORDER BY <field>

In XperienCentral, you manage your query definitions at a central point. Each query definition has a name, code, the name of the database, the presentation format of the retrieved data, which fields of the retrieved data are to be shown in which columns and query parameters.

To show the retrieved data on a web page, you insert a Query content element on a page. In the content element you select the desired query definition.

Query Parameters

To be more flexible with queries, you can use parameters in the query code. For instance, you may use a parameter to filter the data to be retrieved on certain characteristics. Then, to change the filter characteristics, you only have to assign another value to the parameter without changing the query code. The parameter is put between @ characters in the WHERE clause. For example:

SELECT <fields> FROM <tables> WHERE <field> IN (@myParameter@) ORDER BY <field>

You can assign values to a parameter at two levels:

  • With the query content element
  • With the query definition

About the Example Database

In this topic, the example database "Who is Who" is used to illustrate concepts. In this database, the whPerson table is the central table containing most of the personal data. The other tables are extensions used to store additional information about the person.

 

 

 

Back to Top

 


Connecting an External Database

You can connect one or more databases of the type MySQL, MSSQL and Oracle. A database is contained on a database server, which may accommodate one or more databases. Prior to configuring a database connection the database server must have been installed and started up properly. For each database connection, you have to set the name and some connection related attributes like the URL, a valid user name and a password.

To connect an external database, perform the following steps:

  1. Make sure a filled external database is available and that you know the connection related attributes.
  2. Navigate to Configuration -> Database Maintenance.
  3. Select the [Database connections] tab.
  4. Select [New database connection] from the pull-down menu (top left). A blank dialogue pane with connection related attributes is shown.
  5. Enter the connection related attributes.
  6. Press [Apply]. If XperienCentral can make the connection, the product and driver information is shown as well as a table content list.




See Database Maintenance for complete information on connecting external databases.

 

Back to Top

 


Using Queries

In this section, we setup a basic view on the whPerson table by showing the following fields: lastname, prefix, firstname and email. This section will not elaborate on all the fields in the XperienCentral screens; go to section *** for a detailed description on each field of the different panels. For this section we start with this query:

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whPerson.email FROM whPerson ORDER BY whPerson.lastname

Defining an Overview Query

Select menu Configuration > Queries (Query tab):

  • To create a query, select ‘New query’ from the drop-down menu (see A).
  • To copy a query, select that query and click [Copy] (see B).
  • To delete a query, select that query and click [Delete] (see C).
  • To add a column to the overview for any field in the SELECT clause, click [All fields] (see D). Then enter the column names (headings).
  • To enable sorting by column, check the ‘Sort’ box] (see E).





Defining a Query Content Element

After defining the overview query, you can place the Query content element on a page.

  1. Navigate to the desired page.
  2. Add the Query content element to the page.
  3. Select the desired overview query from the drop-down list.




 

Showing the Basic Overview

The result may look like this. Sorting by column has been enabled for ‘Last name’ and ‘First name’. By clicking on it, you can toggle sorting between ascending and descending order. For this type of content element with this presentation format, the title in the content element is not shown.

 

 

 

Back to Top

 


Overview with Parameter

Introduction

In this section, we introduce a query parameter. However, first we extend the overview with a column ‘Location’. In the query code, the ‘AS’ statement renames a field named ‘name’ to ‘locname’. This is used to avoid possible confusion with fields in other tables that are also named ‘name’ (in example further on in this document):

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whPerson.email, whLocation.name AS locname FROM   whPerson, whPersonLocation, whLocation WHERE whPerson.id=whPersonLocation.person  AND  whPersonLocation.location=whLocation.id ORDER  BY whPerson.lastname

To be able to filter on names of different locations, we use a parameter @place@. A parameter substitutes a comma-separated list and thus it can adopt more than one value at the same time.

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whPerson.email, whLocation.name AS locname FROM   whPerson, whPersonLocation, whLocation WHERE whPerson.id=whPersonLocation.person  AND whPersonLocation.location=whLocation.id  AND  whLocation.id IN (@place@) ORDER  BY whPerson.lastname

Defining an Overview Query with Parameter

  1. Select the desired overview query (Configuration > Queries).
  2. Enter the query with a parameter.
  3. Press [Apply]. A "Parameters" section is automatically added at the bottom of the screen.
  4. Define the parameter options:
    • Set the type to "Integer".
    • Select "Edit in element" to be able to assign values to the parameter on the query content element.
    • Select "List" to be able to assign more than one value to the parameter on the query content element.

 

 

Connecting an Options Table to a Parameter

The goal is to let the editor choose from a list of options for the place parameter at the Query content element. The options in the list can be obtained from another table from the database.

  1. Click "Connect to table" (or "Edit table" if a table already exists).
  2. Enter the name of the table and the names of the ID and name fields. Click [Apply].
  3. Press [Close]. You can now select a default value for the parameter. This list is also available with the query content element now.

 

 

Defining a Query Content Element with Parameter

After defining the overview query, you can place the content element ‘Query’ on a page.

  1. Navigate to the desired page.
  2. Add a Query content element.
  3. Select an overview query that includes a parameter. A parameter pull-down box is added to the content element.
  4. Select one or more parameter values on which you want to filter your view.


 

If you selected ‘Use search pop-up’ (see 3.2.3 Connecting an options table to a parameter), the following screen pops up when setting the locations on the query element:

 

 

Showing the Overview with Parameters

The result only shows records in which the location is Amsterdam or Nijmegen:

 

 

 

Back to Top

 


Overview with Link to Detail View

Introduction

In this section, first we define a detail view and then from an overview we set a link to it. A detail view is defined by three query types:

  • Get information query.
  • Get query
  • Search query

Get Information Query

This query is used to retrieve all the details of one specific record (the record that was clicked on in the overview). The record is identified by a parameter that is referred to as @dbid@ and which is typically used in the WHERE clause. When you click on a link of a specific record in the overview, the @dbid@ parameter gets the ID value of the record after which the query is executed. In our example, we use the following query:

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whPerson.telephone FROM   whPerson WHERE  whPerson.id=@dbid@

Get Query

This query is used to retrieve the title of the detail view. This title is typically shown in a larger font on the page. The query must contain an "id" and a "name" in the SELECT clause. In our example, we use the following query code:

SELECT whPerson.id AS id, whperson.lastname AS name FROM whPerson WHERE whPerson.id=@dbid@

Search Query

This query is used to retrieve data for search functions that are present in XperienCentral itself. The query must contain an "id" and a "name" in the SELECT clause. In addition, it needs an @search@ parameter in the WHERE clause. In our example, we use the following code:

SELECT whPerson.id AS id, whperson.lastname AS name FROM whPerson WHERE  lastname LIKE '%@search@%'

Defining a Detail View

  1. Navigate to Configuration > External Databases.
  2. Enter the queries and define other settings. For example:



Linking an Overview to a Detail View

In our basic overview example, we add a link from the ‘Last name’ field to a person’s detail view. However, to be able to link to a detail view, an integer field with the unique record ID must be present in the SELECT clause. Any other type of ID than an integer type of field will not work.

So, in our overview the overview query code will be:

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whPerson.email, whPerson.id AS personid FROM whPerson ORDER  BY whPerson.lastname

This record ID field must be selected in the ‘Columns settings’ as well. More than likely, it is not the intention to show this integer field at the website. So, we set it to ‘Do not show’.

  1. Select the desired overview query (Configuration > Queries Queries tab).
  2. Under "Column settings" add a column for the record ID field and check "NT" for "Do not show".
  3. In order for the field to be linked, select "New link" under "Column settings" or "Modify link" if a link already exists.
  4. From the "Field" drop-down list, select the ID field(in this example "personid").
  5. From the "To" drop-down list, select the desired detail view. Click [Save].



  6. Click [Close]. The overview query looks like this:

 

After defining the overview query, you can place the Query content element on a page.

  1. Navigate to the desired page.
  2. Add a Query content element.
  3. Select an overview query that includes a link to a detail view from the upper drop-down list:






Showing the Overview with Link to Detail View

In the example below, the upper part shows the overview. The lower part is the detail view, which appears after clicking the last name "Groot":

 

 

Using a Special Page for the Detail View

By default, the detail view is shown on the same page as the overview. If this is not desired, because one of the views needs a different presentation, you can also place the detail view on another special page. Proceed as follows:

  1. Create the detail page and publish it.
  2. Navigate to Configuration > Channel Configuration > Special pages.
  3. Find the name of the detail view under "Database pages" and click [Search].
  4. Select the page on which the detail view is to be shown and click [Apply].

The detail view will hereafter be shown on this special page.

 

Back to Top

 


More Complex Example

This section just shows the queries that belong to the introductory example in section *** Views on database content’. This example has the following characteristics:

  • A parameter that filters on the locations Amsterdam and Nijmegen.
  • A link to a detailed view which is shown underneath the overview.
  • Three columns (Department, Job and Location) whose fields are not retrieved directly from the whPerson table but indirectly through six other tables. This requires a more complex WHERE clause.

Overview Query

SELECT whPerson.lastname, whPerson.prefix, whPerson.firstname, whDepartment.name AS depname, whJob.name AS jobname, whLocation.name AS locname, whPerson.id AS personid FROM whPerson, whPersonDepartment, whDepartment, whPersonJob, whJob, whPersonLocation, whLocation WHERE  whPerson.id=whPersonDepartment.person AND  whPersonDepartment.department=whDepartment.id AND whPerson.id=whPersonJob.person AND whPersonJob.job=whJob.id AND whPerson.id=whPersonLocation.person AND whPersonLocation.location=whLocation.id AND whLocation.id IN (@place@) ORDER BY whPerson.lastname

Detail Query – Get Information

 

SELECT firstname + ' ' + prefix + ' ' + lastname AS fullname, title, firstname, prefix, lastname, whDepartment.name AS depname, whJob.name AS jobname, whLocation.name AS locname, email, telephone, devicenumber, fax, mobile, convert(char(10), birthdate, 105) AS birthdate FROM whPerson, whPersonDepartment, whDepartment, whPersonJob, whJob, whPersonLocation, whLocation WHERE  whPerson.id = @dbid@ AND whPerson.id=whPersonDepartment.person AND whPersonDepartment.department=whDepartment.id AND whPerson.id=whPersonJob.person AND whPersonJob.job=whJob.id AND whPerson.id=whPersonLocation.person AND whPersonLocation.location=whLocation.id

 

Back to Top

 


Reference Information

Database Connection Panel

Configuration > Database Maintenance > Database connections

 

Field

Description

Drop-down selection box

List of database connections.

Delete button

Deletes the current database connection.

Name

The name of the database connection. The name is case sensitive.

Connection URL

The URL where an application can access the database.

Driver class

The classpath of the JDBC driver software.

Username

The user name to use to log in to the database.

Password

The user's password.

Maximum number of connections

The maximum number of connections that may be established between XperienCentral and the database for that database pool.

Database type

Select the database type: MySQL, Oracle or MSSQL.

Product name

The full product name of the database server.

Product version

The product version of the database server.

Driver name

The name of the database driver.

Driver version

The version of the database driver.

Tables

A list of the database tables. When you click on a table name, the field definitions of the table are shown at the right.

Query Overview Panel

Configuration > Queries > Query

 

Field

Description

Copy button

Copies the current query. The name of the copy is "Copy of <name>".

Delete button

Deletes the current query.

Name

The name of the query that should be displayed in the selection lists.

Title

Title that should appear above the result when the query is submitted on a page.

Presentation

Select "WM query" for the presentation to use for the results of the query.

Database

 

The database the query is submitted to.

Maximum number of pages

‘Page size’ x ‘Maximum number of pages’ = maximum number of records retrieved from the database.

Page size

 

The number of records allowed to be shown on a page.

Show column heading

 

Indicates whether column headings should be shown above the query result.

Show row number

 

Indicates whether row numbers should be shown in front of records.

Type

Type of query: ‘Normal’, ‘Who-is-Who’, ‘Target audience’, ‘Events’, ‘Subjects’, ‘Product overview’, ‘Themes’, ‘Questions’, or ‘Documents’. Depending on the functionality present, this list can include more or fewer types.

 

By default, ‘Normal’ is selected here. Only ‘Normal’ belongs to the standard functionality of GX XperienCentral.

Modify query manually

The query can be manually entered here. Do not use SELECT *, but name the individual column headings in the SELECT clause.Enter a variable by entering a word that begins and ends with @, such as @keyword@. These variables become the parameters of the query.

[Compose advanced query] link

If the Microsoft SQL Server is used, a table with columns can be assigned using a wizard. The SELECT statement will then be generated.

[Preview] link

If the Microsoft SQL Server is used, the result of the query can be viewed. If parameters are used in the query, a pop-up window appears where these parameters can be entered.

Column settings - Order

 

A number that determines the sequence of the columns.

Column settings - Width

 

Width of the column in pixels. If no width value is entered, the browser will determine the width.

Column settings – Query field

 

Database field where the column gets its information.

Column settings – Column name

Text that should be shown above the column on the page (if the ‘Show column heading’ is set to ‘Yes’). If this field is left blank, the content of the ‘Query field’ will be used.

Column settings - NT

Indicates whether this column should be shown. This can be handy to still have the primary key columns available when several tables are joined.

Column settings - Sort

 

 

Column settings - Null

Indicates whether a 0 should be shown if a cell in this column is empty or if the value is 0.

Column settings – 2DB

If ‘Sort’ is checked, indicate here whether the data should be sorted in the database. Otherwise, the data will be sorted in GX XperienCentral.

Column settings - Delete

The column can be deleted here.

New link/

Modify link

To create a hyperlink to a database page. Example of pop-up:

 

 

‘Field’: Select the property from the pulldown which contains the ID to the detailed view of the object. This property always has to be of the integer type.

‘To’: A selection can be made from the database pages that are defined by Configure > External databases

New column button + number

Add a number of columns.

All fields button

Add as many columns as there are fields in the SELECT clause of the query.

 

 

The following fields are only visible if the query has @ parameters:

 

Field

Meaning

Parameters

A number that determines the sequence of the parameters and the headings.

Parameters - Parameter

The name of the parameter, as it occurs in the query, but then without the enclosing ‘at’ symbols (@).

Parameters - Description

In the case of a parameter, the name of the parameter appears here. In the case of a headline, the text of the headline appears here.

Parameters - Type

 

The data type of the parameter (‘Date’, ‘Integer’, or ‘Text’.)

Parameters - List

Indicates whether it is allowed to enter more values for this parameter. If this option is checked, several values can be selected on the query content element:

 

 

Parameters - Optional

Indicates whether this parameter is optional or required.

 

If a parameter has no value, GX XperienCentral removes the row where this parameter is used from the query. Therefore, set this type of WHERE parts in separate rows.

Parameters – Edit in element

Indicates whether the value of the parameter may be entered on the content element or whether the parameter is filled, based on the value in the query string.

Parameters – Default value

The default value of the parameter if a value is not entered.

Parameters –Add headline

Enter a new headline here. Headlines are texts that can be set on the query element between groups of parameters. This is done to enhance usability.

Connect to table/

Edit connected table

This allows connecting a parameter to a column from a table to show a list of selections on the query element.

Example:

  • Next to ’Connected table’ is the name of the table from which the selection list has to be generated.
  • The ‘Connected table ID field’ is the column that contains the unique codes of this table. This should be an integer field.
  • The ‘Connected table name field’ is the column that contains the list elements.
  • Using ‘Additional restriction’ a query can be entered without the SELECT and FROM clauses. Usually, there will only be a WHERE clause here.
  • If a pop-up is chosen, for example, the following is displayed when setting the locations on the query element:

Parameters - [Delete] button

Only present if a headline exists. Deletes the headline.

Detail Query Screen

Configuration > External Databases

 

Field

Description

Select

List of database page models (detail views).

[Delete] button

Delete this database connection.

Description

Name of the database page that should be displayed in the selection lists.

Database

List of database connections.

Presentation

Select ‘WM Details’. This is the default value in GX XperienCentral.

 

Other values (such as ‘WM Agenda’, ‘WM Person’, and ‘WM Product’) are added to the list if certain functionalities are imported in GX XperienCentral.

Value

A unique value used by the search engine for indexing.

Get information query

This is the query to be run if the detail view has to be displayed. This query is connected with @dbid@ to the record that was clicked through.

The variable @dbid@ contains the primary key in the table and can be used to retrieve the correct record.

Example:

SELECT employee_name, salary, commission FROM employees WHERE  employee_id = @dbid@

Show settings -

A number that determines the sequence of the columns to be shown.

Show settings – Query field

Name of the column in the SELECT clause. This can be a column name or alias (behind the keyword ‘AS’).

Show settings – Column name

Text that should be shown above the column on the page (only if the ‘Show column heading’ is set to ‘Yes’). If this field is left blank, the content of the ‘Query field’ will be used.

Show settings – Don’t show

Indicates whether this column should be shown or not.

 

This can be handy to still have the primary key columns available when several tables are joined.

Show settings – Always index

A column that is not shown is not indexed by default. To index this column, a check mark can be placed here. This setting is, however, ignored if ‘Index for search’ is set to ‘No’.

Show settings - Delete

The column to be shown can be deleted here.

Show settings - [New column] button + number

Add a number of columns.

Get query

Query to retrieve the title of the database object. This title is shown on the page in a larger font. The query has to contain an ID and a NAME in the SELECT clause.

Search query

The search query is used in two places:

  1. While indexing the database pages. It sees to that every entry can be shown on a page.
  2. While connecting terms to entries that are on a database page. For further explanation see the document belonging to the license component ‘Media Repository’.

The query has to return an ID and a NAME and can use the ‘search’ parameter to find the proper records in the database. An example:

SELECT whPerson.id AS id, whperson.lastname AS name FROM whPerson WHERE lastname LIKE '%@search@%'

Link query

Using this query, the links related to this table can be retrieved from a specially created link table.

The Link query is only used for the product catalog and for meetings that have been created in the Meetings and Papers component.

Index for search

Indicates whether this type of page should be indexed and, therefore, be shown in the search element.

 

 

Back to Top

 

 

 

 

 

  • No labels