/
General

General

Owned by Matthew Wagner
Last updated: Mar 07, 2025

Some of the default values for settings configurable on the General tab should not be changed. If you are unsure what the value for a specific setting should be, contact your GX Software consultant. In a multi-channel configuration, each channel has its own configuration set with the name <configuration_set_name> (name) where "name" is the ID of the channel.

In This Topic


application_settings


PropertyDescription
add_csrf_token_header_to_external_responses

This setting was introduced in XperienCentral version R33.

When enabled, an X-CSRF-Token header is included in the response to GET requests from external domains, which must be used in a subsequent POST or PUT request. The exposed_headers and allowed_http_headers settings in the corsfilter section (below) must also be set to "X-CSRF-Token". See /wiki/spaces/PD/pages/24718337 for more information.

authorization_lockout_ip_whitelist

A list of IP's that can not be locked out of XperienCentral's Edit environment. Enter a valid IPv4 or IPv6 address.

channels_using_fallbackSpecifies the channel(s) that use the default design configuration when no custom JSP can be found for it.
check_url_signatureIf this option is turned on, URL's containing a presentation ID and/or an SSI object ID are suffixed with a sign parameter when they are rendered, which contains a hash of the parameters in the URL. When the URL is called, the value of the sign parameter is checked versus a newly calculated hash based on that URL. If the value of the sign parameter does not match that of the newly calculated hash, that means that the URL has been tampered with and the request will be refused.
clusternode_eventlistener_heartbeat_ms

This setting was introduced in XperienCentral version 10.22.1.

Specifies how often, in milliseconds, the cluster event service listens for events on other servers in the cluster.

clusternode_registration_heartbeat_ms

This setting was introduced in XperienCentral version 10.22.1.

Specifies how often, in milliseconds, the cluster event service checks for multiple active sessions for the same XperienCentral user. See Active Sessions for more information,

company_name

This setting was introduced in XperienCentral version R42.

This setting allows you to add your company name (or another string) to the XperienCentral Login page. See Customizing the Login Page for complete information. In XperienCentral versions R47 and higher, the company_name text supports basic HTML formatting tags such as <b>, <i>, <u>, <ol>, <ul> and <pre>.

contentindex_index_readonly_nodes

This setting was introduced in XperienCentral version R37.

If the Search & Retrieve API is used on a clustered environment, this setting should be enabled, otherwise the API will not return any results. When this setting is enabled, the content index must be rebuilt.

content_item_lock_poll_intervalA content locking poll thread that checks whether a content item lock is expired. If so, the lock is removed. The value is in milliseconds.
content_item_lock_timeoutSpecifies the number of milliseconds that have to elapse after a lock on a content item has been claimed before the lock is closed.
contentindex_locationThe directory where the content index and its configuration are stored.
contentindex_optimize_scheduleThe Crontab schedule that dictates when the content index is optimized. This should be set to happen at least once a day, preferably at the time that website activity is at its lowest (typically at night).The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
contentindex_queue_database_entries_scheduleThe Crontab schedule that dictates when to put database entities in the queue for the search indexing. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
contentindex_queue_empty_reindexSpecifies whether to disable the regeneration of the full background index when the queue is empty. Because a full index regeneration is performed regularly according to the contentindex_queue_reindex_schedule, you might want to block a full index generation at other times for performance reasons.
contentindex_queue_iteration_limitThe maximum batch size for each poller iteration. The default is 100. The larger the number, the greater the impact is on performance.
contentindex_queue_janitor_scheduleThe Crontab schedule that dictates when the index journal is cleaned up. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
contentindex_queue_poller_scheduleThe Crontab schedule that dictates when the index journal is polled for changes. The more frequently this is performed, the more up to date the index will be. Note that each cycle must be able to finish before the next begins. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
contentindex_queue_reindex_scheduleThe Crontab schedule that dictates the triggering of a full background index. This should happen no more then once a day, preferably at the time that website activity is at its lowest (typically at night). The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
context_static

This setting was removed from XperienCentral in version R36. Use the setting application_settings.static_files_url instead.

The root URL of the static web application. In XperienCentral versions R36 and higher, use the setting static_files_url instead.

create_content_revisions

This setting was introduced in XperienCentral version R29.

Specifies whether XperienCentral automatically creates revisions of content items. See Reverting a Content Item for more information. See also the settings max_age and schedule.

csrf_ignore_url_paths_regex


This setting was introduced in XperienCentral version R33.1.

Specifies the URL paths that are not checked for CSRF vulnerabilities. Define the excluded URLs using a Regular Expressions that matches the URL path, excluding the context path. For example, to disable the protection for all requests to "myservlet" (https://mydomain.com/web/myservlet/foo/bar?q=xxx), add an expression like the following:

/myservlet(/.*)?


Exempting URLs from the CSRF checks weakens the security of your channel(s), therefore you should exercise caution with this setting.

current_rollover_detector_scheduleThe Crontab schedule that dictates when the rollover detector service runs. The detector service detects changes in the outcome of ContentItem.getCurrent(Language) and if any is detected, it updates the caching timestamps and friendly URLs. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
date_formatThe format in which dates are represented (for example, dd-MM-yyyy).
default_timezone

Specify the default time zone for the XperienCentral installation. The time zone you specify is the absolute time upon which all timestamps in XperienCentral are based (creation date, publication date, expiration date, etc.). When users select their own time zone in My Settings, the time zone they select is calculated as an offset based on the default XperienCentral time zone. The following are the most commonly used time zones. For the full list of acceptable time zones, see http://en.wikipedia.org/wiki/List_of_tz_database_time_zones.

Time ZoneValue
AmsterdamEurope/Amsterdam
BerlinEurope/Berlin
IstanbulEurope/Istanbul
LondonEurope/London
LisbonEurope/Lisbon
MoscowEurope/Moscow
Atlantic timeCanada/Atlantic
Eastern timeAmerica/New_York
Central timeAmerica/Chicago
Mountain timeAmerica/Edmonton
Pacific timeAmerica/Los_Angeles
Alaska timeAmerica/Anchorage
Hawaiian timeAmerica/Hawaii
IndiaAsia/Calcutta
ChinaAsia/Shanghai
JapanJapan
Western Standard timeAustralia/Perth
Central Standard timeAustralia/North
Lord Howe Standard timeAustralia/LHI
disable_unused_content_schedule

Schedule in cron format for the disable unused content job. The Crontab schedule for disabling unused content. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning.For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.

enable_non_jndi_database_configurationSelect this option if you are using a non-JNDI database for your XperienCentral project.
form_handler_baseSpecifies the URL where the definitions for Interactive Forms are located.
google_sitemap_automatic_upload

This setting was introduced in XperienCentral version R33.

Specifies whether XperienCentral automatically uploads generated sitemaps to Google. When enabled, if a Google sitemap is generated, it is automatically uploaded according to the schedule configured in the setting google_sitemap_generator_schedule. When disabled, the latest generated sitemap is not uploaded.

google_sitemap_excluded_types

Specifies the content type(s) to exclude from your generated google sitemap. To see which content types are present in your channel, execute the following query on the Queries tab in the Database Maintenance panel:


SELECT value FROM wmjellycontenttype

The results show the content type identifiers. To exclude a content type, enter its identifier in the text field and click [Add value].

google_sitemap_generator_scheduleThe Crontab schedule that dictates when the Google sitemap will be generated. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
http_non_proxy_hosts

Specifies the hosts that should be directly contacted for requests via HTTP and HTTPS (not through the proxy server). You can enter multiple host names separated by the pipe character (|) and also use wildcards. For example:

*.wm.com|localhost

Notes

  • This setting also applies to HTTPS requests even though the name of the setting suggests that it only applies to HTTP requests. This has to do with how Java itself is structured. See Networking Properties (Oracle documentation).
  • If you use a proxy, GX Software recommends that you always add the host names of the XperienCentral front-end and backend servers to this list.
http_proxy_hostThe name of the HTTP proxy host server to use to send requests to the XperienCentral server.
http_proxy_passwordThe password to use to log in to the proxy host via HTTP. If no password is required, leave this field blank.
http_proxy_portThe port number to connect to on the HTTP proxy host.
http_proxy_usernameThe username to use on the HTTP proxy host.
http_use_proxy

Specifies whether to use one or more proxy servers to log in to the XperienCentral server.

Beginning in XperienCentral R26, proxy system properties set outside of XperienCentral are no longer overwritten when this setting is clear (false).

https_proxy_host

This setting was introduced in XperienCentral version R26.

The name of the HTTPS proxy host server to use to send requests to the XperienCentral server.

https_proxy_password

This setting was introduced in XperienCentral version R26.

The password to use to log in to the proxy host via HTTPS. If no password is required, leave this field blank.

https_proxy_port

This setting was introduced in XperienCentral version R26.

The port number to connect to on the HTTPS proxy host.

https_proxy_username

This setting was introduced in XperienCentral version R26.

The username to use on the HTTPS proxy host.

https_use_http_page_links

This setting was introduced in XperienCentral version R26.

When this setting is enabled, a visitor will use HTTP to link to a page even if the Use HTTPS setting for that page is enabled.

https_use_proxy

This setting was introduced in XperienCentral version R26.

Specifies whether to use one or more proxy servers to log in to the XperienCentral server. Proxy system properties set outside of XperienCentral are not overwritten when this setting is clear (false).

internal_backend_addressFor use with IBM WebSphere. Contact your GX Software consultant for more information.
internal_frontend_addressFor use with IBM WebSphere. Contact your GX Software consultant for more information.
internal_http_authentication_passwordThe password to use in conjunction with the username (below) for connections XperienCentral makes with itself through the front- or backend.
internal_http_authentication_usernameThe username to use for connections XperienCentral makes with itself through the front or backend.
internal_http_use_authenticationSpecifies whether to use a username/password combination for authenticating connections that XperienCentral makes with itself through the front or backend.
internal_http_use_form_authenticationSpecifies whether internal HTTP connections use HTTP form
internal_http_use_form_authentication_session_expirationThe configuration entry for the expiration of the session cookie used for HTTP form authentication
jcr_datastore_cleaner_schedule

The Crontab schedule that dictates when the JCR datastore cleaner runs. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.

Beginning in version R28, XperienCentral no longer uses the Apache Jackrabbit JCR indexing solution by default. This setting is only relevant to users of XperienCentral versions R27 and lower. See the XperienCentral upgrades notes for version R28 for more information.

languagelabels_cache_size

This setting determines the maximum size of the language label cache. Ideally the maximum size should be equal or slightly higher than the number of language labels across all channels. The default is 10000.

limboelement_cleanup_scheduleThe Crontab schedule that dictates when limbo elements are cleaned up. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
limboelement_expiration_intervalThe Crontab schedule that dictates when limbo elements expire and are deleted. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
password_banned_wordsSpecifies the string(s) that may not be used as passwords. To add a new value, enter the string in the text field and click [Add value].
password_min_distancePassword minimum distance. Specifies the extent to which a string to be used as a password must differ from any of the banned passwords. Take the following example: the string "Administrator" is banned as a password. If the minimum distance is 2, then the allowed strings to be used as a password must differ in at least two ways from "Administrator". The password "Administrat0r" (using a zero "0" instead of an "o") is unacceptable because it differs in only one way from "Administrator".
password_min_entropySpecifies how complicated a password must be. The allowed values are between 50 and 100, 100 being the most strict setting.
profiler_entry_children_limitSpecifies the limit of child entries for a profiler.
render_threadsSpecifies the number of parallel threads to use when rendering content on the website front-end. If the content on your website does not change at a high rate, it is recommended that you do not set this value too high.
render_threads_incontextSpecifies the number of parallel threads to use when rendering content on the website backend. Using multiple threads can significantly increase the performance of rendering content in the Editor.

reserved_context_path

This setting was introduced in XperienCentral version R36.

Specifies one or more context paths that are reserved in XperienceCentral. Reserving a context path is necessary if a website's friendly URLs have no extension and one or more external applications are running on the same host as XperienCentral and you want to avoid a friendly URL being created that matches the internal path of an external application. Enter a context path (without slashes) in the field and click [Add value]. If you run XperienCentral without friendly URL extensions, add the following values:

  • web
  • static
  • upload
  • upload_mm
  • cfg
  • info
  • wm

See also Running XperienCentral without a Friendly URL Extension.

secret_keyThe key used to sign configuration.
secure_rest_against_csrf

Specifies whether XperienCentral protects against CSRF attacks on its REST API.

This setting should always be on (selected).

session_tracking_cookie_nameThe name of the cookie used for tracking XperienCentral user sessions.
smtp_hostThe host name of the SMTP-server.
smtp_start_tlsSpecifies whether TLS should be used when XperienCentral sends emails.
stale_cluster_lock_retry_timeThe amount of time, in seconds, that indicates that a lock that a server in a clustered environment has for a particular item is no longer valid.
static_files_urlThe URL where static files from plugins are stored. In XperienCentral versions R36 and higher, this setting is used instead of the old setting application_settings.context_static. The value can be either a relative or an absolute path. This is especially useful to configure a CDN URL to serve the statics from.
statistics_cycle_duration

Specifies the number of milliseconds into the past that the XperienCentral performance statistics are saved. The minimum value is 10000. The default is 7200000 (2 hours). GX Software advises that you do not set the cycle duration to a value lower than the default value.

Setting this property to a high value, such as 6 hours or more, will naturally have an effect on how long the page takes to load. The statistics can be viewed by navigating to the Statistics Administrative Page.

streaming_file_directoryThe folder where streaming files are stored.
strict_servlet_apiSpecifies whether to use the content-type header set by the first included JSP for the entire request.
url_cache_cleanSpecifies the age (in milliseconds) that items can become before they are deleted from the cache.
url_cache_timeoutSpecifies the amount of time (in milliseconds) between cache cleanups.
url_encodingThe encoding to use for encoding URLs, "UTF-8" for example.
urlsign_keyThe key used to sign URLs.
weblogging_logfile_locationThe location of the web logging log file.
xss_allowlist_siteworks_expressions

This setting was introduced in XperienCentral version R29.3.

/wiki/spaces/PD/pages/24707222 (login required).

xss_allowlist_siteworks_qs_parameters

This setting was introduced in XperienCentral version R29.3.

/wiki/spaces/PD/pages/24707222 (login required).

Back to top



backend_system_settings


PropertyDescription
frontendxssfilter_class_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the parameter(s) that cause a request to be blocked if they do not conform to a valid Java class name. /wiki/spaces/PD/pages/24707222 (login required).

frontendxssfilter_integer_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the parameter(s) that cause a request to be blocked if they do not contain a valid integer. /wiki/spaces/PD/pages/24707222 (login required).

frontendxssfilter_uuid_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the parameter(s) that cause a request to be blocked if they do not contain a valid UUID. /wiki/spaces/PD/pages/24707222 (login required).

ignore_backend_cookiesSpecifies whether to ignore cookies relayed by a front-end proxy to the backend server.
max_charSpecifies the code of the highest ASCII character that XperienCentral will output. The default is "127" (all standard ASCII characters).
max_includes_depthSpecifies the maximum number of includes allowed in a config.
max_includes_per_requestSpecifies the maximum number of includes that are allowed during a single request.
max_recursion_depthSpecifies the maximum depth of includes recursion.
ntlm_auth_domain_controllerSpecifies the IP address of the NTLM authentication server.
ntlm_auth_enabledEnables/disables NTLM authorization.
ntlm_auth_ignore_hostsSpecifies the names of the hosts from which requests will be ignored. Separate multiple host names using a comma (,).
ntlm_auth_ignore_user_agentsSpecifies the user agents that will be ignored.
package_image_urlSpecifies the location where XperienCentral menu-related images are stored.
presentation_jsps_urlThe relative URL of the XperienCentral design config JSPs. In XperienCentral versions R43 and higher, you must add the location /WEB-INF/project/nl.gx.product.wmpbasepresentation for all projects.
replicate_uploads_on_readonlySpecifies whether to replicate uploaded files on read-only servers in a cluster.
static_files_locationSpecifies the directory where static files are stored (relative to the XperienCentral installation).
user_profiles_export_maxSpecifies the maximum number of user profiles that can be exported in one export file.
xssfilter_get_ignore_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the parameters that are checked for forbidden characters in GET requests.  Add the parameters to check in a comma-separated list. The forbidden characters are <, >, ' and ". The list of forbidden characters cannot be extended. /wiki/spaces/PD/pages/24707222 (login required).

xssfilter_post_check_urls_for_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the URL expressions to block. /wiki/spaces/PD/pages/24707222 (login required).

xssfilter_post_ignore_urls_for_parameters

This setting was introduced in XperienCentral version R29.3.

Specifies the URLs that are ignored in POST requests. The default ignored URLs (for Layout editing and Persona editing) are:

  • <context>/wcb/nl.gx.product.wmpgui/panel.html?panelIdentifier=wmppersona.personaManagementPanel
  • <context>/wcb/nl.gx.product.wmpgui/panel.html?panelIdentifier=wmplayout.layoutManagementPanel

/wiki/spaces/PD/pages/24707222 (login required).

xssfilter_url_check_ignore

This setting was introduced in XperienCentral version R29.3.

Specifies the trusted URLs. This filter blocks a request if the request URI (the URL path) contains the characters < or > or a UTF-8 encoded version of these characters The list of forbidden characters cannot be extended. Add trusted URLs using a regular expression. /wiki/spaces/PD/pages/24707222 (login required).


Back to top


connector


PropertyDescription
ajaxrefreshrateSpecifies, in milliseconds, how often to refresh the Ajax progress bar. Setting this to a lower setting may cause lock contention in the JCR and thereby reduce performance for jobs that write intensively to the JCR.
log_retention_daysSpecifies the number of days that logs will be retained.
logdirSpecifies the local directory where the log history files are written.
maxlogentriesSpecifies the maximum number of log entries to keep. Once the limit is reached, the first log entries will be overwritten and eventually all entries will be overwritten in looping fashion.
retentionjob_crontabscheduleThe Crontab schedule that dictates when the retained logs will be deleted. All logs older than the number of days specified by log_retention_days (above) will deleted according to the defined schedule. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
usernameSelect the system user account from the list that will execute the job(s). For more information, see System User.
versionSpecifies the version of the Connector API plugin.
websiteSpecifies the internal ID of the website on which the Connector API is running.


Back to top


corsfilter


PropertyDescription
allowed_http_headersSpecifies which HTTP headers are allowed.
allowed_http_methodsSpecifies which HTTP methods are allowed.
allowed_originsSpecifies which origin(s) are allowed in an HTTP request.
exposed_headersSpecifies which response headers should be made available to scripts running in the browser in response to a cross-origin request.
preflight_max_ageSpecifies how long the results of a preflight request (that is the information contained in the Access-Control-Allow-Methods and Access-Control-Allow-Headers headers) can be cached.
support_credentialsSpecifies whether credentials can be used by the filter.


Back to top


development_settings


PropertyDescription
enable_debug_messagesSpecifies whether to log debug information.
enable_view_resolve_cacheSpecifies whether to cache the views of the Workspace. Caching the views improves performance.


Back to top


file_distribution_settings


PropertyDescription
max_file_size_mbSpecifies the maximum allowed size of a static file, in megabytes for files added to an XperienCentral deployment (Download element, etc.).


Back to top


forms_config_set


PropertyDescription
forms_exportimport_dirSpecifies the directory used by the /wiki/spaces/GXW/pages/25020132component to store temporary import and export files.


Back to top


formsengine_config_set


formsengine_autotrim_valuesSpecifies whether to strip any leading or trailing white space from values entered in forms.
formsengine_check_referrerSpecifies whether forms can be submitted from unrecognized servers. GX Software recommends that this option be selected as an extra safeguard against CSRF attacks.
formsengine_clear_errors_on_back

This setting was introduced in XperienCentral version 10.22.0.

Specifies whether to clear error messages from a form session if the visitor clicks the [Back] button. For example, consider the following scenario:

  • A visitor fills in the fields in step 1 of a form and submits it.
  • On step 2, the visitor does not fill in a required field and submits the step. An error message appears informing the visitor that a required field has not been filled in and they do not proceed to step 3.
  • The visitor clicks the [Back] button and returns to step 1.
  • The visitor resubmits step 1 and proceeds to step 2.

With this option enabled, the visitor will not see an error message on step 2. With this option disabled, the visitor will see the error message upon returning to step 2.

formsengine_enable_sanitationEnables sanition for Interactive Forms.
formsengine_prehandling_cachetimeoutTo ensure good performance for interactive forms, a cache is maintained that defines where they are located. This setting defines the number of seconds that the interactive forms cache lasts.
formsengine_prehandling_check_blocksSpecifies whether to prehandle forms on page sections. Because the creation of the prehandling cache can have a negative effect on performance, GX Software recommends that this setting be switched off unless you need to prehandle forms on page sections.
formsengine_prehandling_check_mediaitemsSpecifies whether to prehandle Content Repository items on page sections. Because the creation of the prehandling cache can have a negative effect on performance, GX Software recommends that this setting be switched off unless you need to prehandle Content Repository items on page sections.
formsengine_prehandling_check_pagesSpecifies whether to prehandle forms on pages. Because the creation of the prehandling cache can have a negative effect on performance, GX Software recommends that this setting be switched off unless you need to prehandle forms on pages.
formsengine_sanitation_attributesSpecifies which HTML attributes are allowed in any HTML element within an interactive form value. For example, adding the attribute id would allow a <div id="99"> if div is also an allowed attribute.
formsengine_sanitation_elements

Specifies which HTML elements are allowed within an interactive form value. For example, if you add "p" then that allows the HTML <p> tag. In addition to configuring attributes and protocols globally, you can also scope it at the element level. The syntax for the formsengine_sanitation_elements value is: 

[element]:[attribute]|[attribute]

For example,

div:id|data

allows <div id="99" data="xx">.

formsengine_sanitation_protocolSpecifies which HTML protocols are allowed within any HTML element within an interactive form value. For example, if you add "href", then <a href="https://www.cnn.com"> would be allowed if "a" is also allowed as a protocol.
formsengine_session_cleaner_scheduleSpecifies the number of seconds between which a check will be done to see whether there are any timed out form sessions. This setting is tied to the following setting (forms_session_timeout).
formsengine_session_timeoutSpecifies the amount of time, in minutes, after which an Interactive Forms session will time out if a website visitor remains idle. For example, if a website visitor starts filling out a form and proceeds through one or more steps and then does nothing, the session will time out after the specified number of minutes. The visitor will be redirected to a "session expired" page when he or she attempts to proceed further after a timeout has occurred.
formsengine_uploaddirSpecifies the temporary directory where uploads in Interactive Forms are stored.



Back to top



frontend_system_settings


PropertyDescription
allow_cacheEnables/disables caching in the XperienCentral front-end.
cache_cacheable_response_codesA comma-separated list of cacheable response codes. The default is "200" (successful response from the server). Only codes that denote an immediate successful response should be entered.
cache_directoryThe folder where the files containing cached content is stored.
cache_directory_depthThe maximum depth that the folder tree used for caching can reach. The recommended value is 3.
cache_max_stale_timeThe number of seconds that the front-end will serve an old version of a page from the cache while the page is being regenerated by the backend. The recommended value is 0.
cache_number_of_directoriesThe maximum number of subfolders that will be created for the caching directory structure. The recommended value is 30.
cache_statement_timeoutSpecifies the number of seconds between queries from the front-end to ensure the validity of cached content.
cache_timestamp_expireThe maximum number of seconds that a query to the Timestamp database is allowed to take. If there is no response from the database within this time period, the cached version of the page is returned. The recommended value is 2.
crawler_useragentContact your GX Software consultant for information on setting this property.
definition_url_baseThe base URL of the forms definitions.
form_upload_directoryThe folder where uploads are temporarily stored.
friendly_url_datasourceThe datasource to use for friendly URLs.
friendly_url_extension

This setting was removed from XperienCentral in version R36.

Specifies the extension to use for friendly URLs (".htm" or ".html").

ignore_user_agentIndicates whether the user agent should be ignored.
log_event_type_factoryFor internal use only. Do not change the default value.
log_file_charsetSpecifies the character set used to encode log files (UTF-8 for example).
max_upload_sizeThe maximum allowed file size, in bytes, for uploads. The default is 10 MB.
proxy_cached_read_timeoutThe number of milliseconds that the proxy waits for a response from the backend. If the backend doesn't respond within the specified time, the cached version of the page is returned. The recommended value is 10000.
proxy_connect_timeoutThe number of milliseconds that the proxy waits for a successful connection to the backend. If the connection cannot be made within the specified time, the cached version of the page will be returned. The recommended value is 30000.
proxy_ip_numberFor internal use only. Do not change the default value.
proxy_max_concurrent_requestsThe maximum allowable number concurrent requests to the proxy server.
proxy_number_of_threadsThis property is not used.
proxy_read_timeoutThe number of milliseconds the proxy waits for an HTTP response. The recommended value is 120000.
proxy_retry_timeoutDetermines the number of milliseconds that the proxy will wait after retrying a page request. The recommended value is 10000.
redirect_disallowedSpecifies whether to allow redirects.
redirect_encodingThe encoding to use for redirects (UTF-8, for example).
registration_forwardbaseThe base URI for registration forms.
timestampfetcher_classnameSpecifies the name of the alternative class to use to fetch timestamps.


Back to top


graphqlservice


PropertyDescription

cache_expiration_time

Specifies the expiration time, in minutes, of the GraphQL cache.
enable_apiSpecifies whether to enable the GraphQL API.
max_query_complexitySpecifies the maximum number of characters allowed in a query.
rate_limit_call_limitSpecifies the maximum number of calls that may be processed from the same IP address.
rate_limit_enabledSpecifies whether rate limiting is enabled.
rate_limit_ignored_ipsSpecifies the IP address that are not subject to rate limiting. To enter an IP address, type the string in the field and then click [Add value].
rate_limit_time_frame_in_minutesSpecifies the time window, in minutes, that is used by the setting rate_limit_call_limit.
require_authenticationSpecifies whether an API key is required when communicating with the XperienCentral GraphQL API.


24718468


headless_search_retrieve


PropertyDescription
channelSpecifies the channel where the headlesss search/retrieve is running.
default_search_result_amountSpecifies the default number of results that will be returned by a search query.
max_items_in_resultSpecifies the maximum number of results that can be returned by a search query.
search_retrieve_enabledSpecifies whether headless search/retrieve is enabled.


Back to top


jcrindex


The option to run XperienCentral front-end nodes without a JCR index was introduced in R28.

XperienCentral versions R27 and lower use the Apache Jackrabbit implementation of the JCR index to perform queries for locating resources. In R28, GX switched to an XperienCentral-optimized solution that uses a database in order to speed up the addition of front-end nodes in cloud deployments. In R29, XperienCentral no longer runs Apache Jackrabbit parallel with its own search index implementation. To enable and use Apache Jackrabbit, see The XperienCentral JCR Index.


PropertyDescription
autorepairSpecifies whether corruptions in the index are automatically detected and repaired. "True" enables this feature and "false" disables it. GX recommends that you set this setting to "true".
mode

Specifies the mode in which XperienCentral performs queries. The options are:

  • prod (default) — Performs queries without additional overhead. This is the recommended setting for production environments.
  • test — Compares the results and speed of running queries using the new database JCR queries to the old built-in way and logs any issues. GX recommends running development environments in this mode to see whether there any issues with your channels.
  • off — Performs queries using the previously used default JCR index.
removebatchsize


wmidcachethresholdSpecifies the number of internal UUIDs to cache in order to improve performance. The default is 1000. Contact your GX consultant before modifying this value.


Back to top


sanitation_config_set


enable_sanitation

Enables the Sanitation service.

attributes

Specifies which HTML attributes are allowed in any HTML element within an interactive form value. For example, adding the attribute id would allow a <div id="99"> if div is also an allowed attribute.
elements

Specifies which HTML elements are allowed within an interactive form value. For example, if you add "p" then that allows the HTML <p>. In addition to configuring attributes and protocols globally, you can also scope it at the element level. The syntax for the formsengine_sanitation_elements value is: 

[element]:[attribute]|[attribute]

For example,

div:id|data

allows <div id="99" data="xx">.

protocols

Specifies which HTML protocols are allowed within any HTML element within an interactive form value. For example, if you add "href", then <a href="https://www.cnn.com"> would be allowed if "a" is also allowed as a protocol.

exclude_from_sanitation_names

Some text within a form value are HTML-like but are not balanced meaning they do not contain both an open and close tag ("<GX>" for example). Such text can be excluded from sanitation and as such will be left untouched. To exclude "<GX>" for example, add "gx" or "GX" - the list is case insensitive.



Back to top


search_settings


PropertyDescription
date_format_parameterSpecifies the format to use for dates (dd-MM-yyyy, for example).
from_parameterSpecifies the "from" parameter to use when results are shown (for example, "From x to y").
maxSpecifies the maximum number of results to show.
order_by_parameterSpecifies how results are ordered.
query_parameterSpecifies the name of the query to use for searches.
scopeSpecifies the location where the XperienCentral internal search engine temporarily stores search results. The valid values are "session" and "request". "Session" means that the search results are stored for the duration of the user's XperienCentral session or until the results have been overwritten by a subsequent search. "Request" means that the search results are only stored for the duration of the current request. For best performance results, you should use "Session" for search results that return multiple pages for a limited number of sessions. If the server handles multiple requests over time, "Request" should be used.
search_serviceThe RMI URL for the Search Service.
to_parameterSpecifies the "to" parameter to use when results are shown (for example "From x to y".


Back to top


startup_settings


PropertyDescription
base_directorySpecifies the base folder for application data.
config_filenameSpecifies the location of the XperienCentral configuration file that determines which license components you have purchased.
contextSpecifies the context path. This is the path that appears directly after the base URL of the home page of the website, /web for example.
seo_path

Specifies the path that appears in a friendly URL after the context path. For example, if the context path is "/web" and the SEO path is "seo", then the friendly URLs will all follow the pattern <hostname>/web/seo/<content item name>.

use_distributed_siteworksSpecifies whether to use distributed Siteworks.
wcb_directorySpecifies the folder to use for deploying plugins.


Back to top


system_constants


PropertyDescription
cleansite_locationSpecifies the location of the "clean" website that is initially imported when XperienCentral is first run.
config_filenameSpecifies the location of the configuration.xml file that contains XperienCentral settings.
discussion_handler_uri Specifies the URI of the discussion handler.
element_controller_uriFor internal use only. Do not change the default value.
file_controller_uriSpecifies the URI of the file controller.
form_handler_uriSpecifies the URI of the form handler.
gettext_uriSpecifies the URI of the gettext servlet.
login_redirect_uriSpecifies the URI of the login redirect.
mediaitem_controller_uriSpecifies the URI of the mediaitem controller.
page_controller_uriSpecifies the URI of the page controller.
panel_controller_uriSpecifies the URI of the panel controller.
redirect_servlet_uriSpecifies the URI of the redirect servlet.
registration_code_servlet_uriSpecifies the URI of the registration code servlet.
search_filter_uriSpecifies the URI of the search filter.
show_servlet_uriSpecifies the URI of the show servlet.
showobject_servlet_uriSpecifies the URI of the showobject servlet.
showobject_servlet_uri_closed_areaSpecifies the URI of the showobject servlet for closed area. *** wat in godsnaam is dit?
sphtml_servlet_uriSpecifies the URI of the SPHTMLservlet.
spring_mvc_controller_uriSpecifies the URI of the Spring MVC controller.


Back to top


webmanager-csp-wcb


PropertyDescription
crontabscheduleThe Crontab schedule that dictates when how often the internal CSP report receiver endpoint bids accumulated reports on a CSP report handler for further handling. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.


Back to top


webmanager_revision_bundle


The settings in this section were introduced in XperienCentral version R29.


PropertyDescription

max_age

Specifies the maximum age, in hours, that a revision will be kept. All revisions older than the specified age will be deleted according to the cleanup schedule (see the following setting).

schedule

The Crontab schedule that dictates when revisions older than that specified by max_age (above) will be deleted. The default is every morning at 00:00. For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.

See Reverting a Content Item for complete information on using the revisions functionality. See also create_content_revisions.


Back to top


website_settings


PropertyDescription
allow_public_access_languagelabelsWhen this setting is disabled, a check is done if the language label maintain permission is enabled when communicating with the language label servlet
allowed_link_prefixesDetermines which prefixes are allowed in the X-Forwarded-Prefix header.To add a prefix, enter the string in the field and click [Add value].
application_filter_definition_url_baseSpecifies the URL where the configuration for external application integration is located.
backend_base_urlSpecifies the base URL for the backend system.
backend_hostnameSpecifies the hostname for the backend system.
backend_server_aliasThe name of the server alias used to reach the XperienCentral back-end.
csp_disabledEnables or disables the /wiki/spaces/PD/pages/24719467 functionality in XperienCentral.
default_contenttypeSpecifies the default content type.
default_encodingSpecifies the default encoding, for example, UTF-8.
default_languageSpecifies the default language.
default_mail_senderSpecifies the default e-mail sender.
default_mail_subjectSpecifies the default e-mail subject.
disable_unused_contentWhen selected, the disable unused content job that depublishes unused content items is run according to the Crontab schedule.
disable_unused_content_whitelisted_extensionsDownload media items with these extensions are disabled.To add an extension, enter a string in the field and click [Add value].
disable_unused_content_whitelisted_media_typesMedia items with these content types are disabled. To add a media type, enter a  string in the field and then click [Add value].

enable_backend_container_filter

Specifies whether to allow an application server backend container to authenticate users who want to log in to XperienCentral. See also Backend Container-based Authentication.
enable_dynamic_user_creationSpecifies whether to create new users in XperienCentral who log in from an application server backend container who don't already exist in XperienCentral. See also Backend Container-based Authentication.
enable_email_two_factor_authentication

This setting was introduced in XperienCentral version R24.2.

Specifies whether XperienCentral's two factor authentication is enabled.

enable_external_role_synchronizationSpecifies whether to synchronize the roles assigned to a user in an application server backend container with their role(s) in XperienCentral. See also Backend Container-based Authentication.
export_directorySpecifies the folder to use for exports.
file_backup_directorySpecifies the folder to use for backups.
file_browser_directoriesSpecifies the directories that you can browse through using the File Browser tab (Configuration > System Utilities). To add a directory, follow these steps:
  1. Add the fully qualified path to the directory in the text field next to [Add value].
  2. Click [Add value]. The new directory is added.
  3. Click [Save Changes] to save the change.
  4. To delete a directory, select the "Delete" checkbox to the right of the directory and then click [Save Changes].
file_download_valid_mime_typesLists the allowed MIME types for the different types of download files which can be uploaded in the Edit environment. This setting is also used for other uploads in the Edit environment. This setting is not used for uploaded images. Note that these MIME types are not configurable.
file_upload_directory
Specifies the folder to use for uploads.
file_upload_mm_directorySpecifies the folder to use for uploaded multimedia items.
file_upload_mm_urlSpecifies the URI of the file upload multimedia folder.
file_upload_urlSpecifies the URI of the file upload folder.

file_upload_valid_directories

Specifies the local directories where files uploaded by the Interactive Forms Upload form element may be stored. To add a directory, follow these steps:
  1. Add the fully qualified path to the directory in the text field next to [Add value].
  2. Click [Add value]. The new directory is added.
  3. Click [Save Changes] to save the change.

To delete a directory, select the "Delete" checkbox to the right of the directory and then click [Save Changes].
friendly_url_cache_clearSpecifies the number of milliseconds that transpire before the friendly URL cache is cleared.
friendly_url_extensionSpecifies the extension to use for friendly URLs (".htm" or ".html"). In XperienCentral versions R36 and higher, you can also leave this field blank which results in friendly URLs that have no extension. See SEO for complete information about search engine optimization in XperienCentral. See also Running XperienCentral without a Friendly URL Extension.
friendly_url_google_news_idSpecifies whether to assign a Google News ID to the friendly URL of Content Repository articles.
friendly_url_lowercaseSpecifies whether uppercase characters are allowed in friendly URLs. When this setting is selected, all friendly URLs are converted to lowercase.
friendly_url_prefixSpecifies the prefix to use for friendly URLs. See SEO for complete information about search engine optimization in XperienCentral.
friendly_url_separatorSpecifies the separator to use for friendly URLs. The allowed values are dash (-), underscore (_) or empty. If you configure an invalid character it will be converted to a dash (-). See SEO for complete information about search engine optimization in XperienCentral.
friendly_url_settingSpecifies which of the three possible titles that a page/content item can have that will be looked at first and used in the friendly URL "urltitle", "navigationtitle", or "title". The default is "navigationtitle".
frontend_hostnameSpecifies the host name of the front-end.
frontend_https_portnrSpecifies the HTTPS port number for the front-end.
frontend_portnrSpecifies the HTTP port number for the front-end.
frontend_server_aliasSpecifies the aliases to use for the front-end host name.
frontend_use_https

This setting was introduced in XperienCentral version R29.

Enables the HTTPS protocol for front-end servers. This setting is especially useful for the preview functionality introduced in XperienCentral R29.

generate_https_sitemap_urlsSpecifies whether to generate HTTPS URLs for the website's sitemap.
handler_url_baseFor internal use only. Do not change the default value.
identifierSpecifies the identifier for this website.
max_image_upload_size

This setting was introduced in XperienCentral version R29.

Specifies the maximum allowable size for uploaded images (backend).

oEmbed_enabledSpecifies whether the features of oEmbed that XperienCentral supports are enabled.
presentation_jsps_url

Specifies the URL to the design config JSPs for this website. You can add multiple paths to this setting.

If you add more than one path, the order from top to bottom as they appear in the list is important. The first matching ID that is found beginning at the top of the list is the one that is used.

previewtoken_expire_minutes

This setting was introduced in XperienCentral R29.

Specifies the amount of time, in minutes, that the preview URL for an unpublished content item remains valid. See also Previewing a Content Item.

productcatalog_nameSpecifies the name of the catalog used by the Product Maintenance component.
projectidFor internal use only. Do not change the default value.
redirect_base_urlOnly to be used for backward comparability with older versions of XperienCentral. Contact your GX Software consultant for more information.
redirect_basedirectorySpecifies the redirect base folder.
render_form_name_and_idSpecifies whether the name as well as the attribute ID for <form/> tags is rendered. This property is used for web guideline compliance.

render_personalization_markers

Personalization markers were introduced in XperienCentral version 10.15.0.

Enables XperienCentral to send visitor statistics related to personalizations to Google Analytics. This functionality requires the XperienCentral Insights Platform. When enabled, this setting adds hidden <div> tags which contain data personalization attributes needed by Google Analytics to personalized content. The only information sent to Google Analytics is the name of the personalization.

search_redirect_baseSpecifies whether the name as well as the attirbute-ID for <form/>> tags is rendered. This property is used for web guideline compliance.
searchresult_replacementThis property is not used.
sitestat_urlSpecifies the URL for Sitestat.
start_object_idSpecifies the identifier of the homepage for this website.
static_files_urlSpecifies the URI to the static files for this website.
use_absolute_urlsSpecifies whether to use absolute URLs.
use_inline_environmentSpecifies whether to use the inline environment.
use_languagelabels_inheritanceDetermines whether inheritance is used when retrieving language labels.
valid_link_schemes
Specifies the link prefixes that are allowed in hyperlinks in content in XperienCentral. The default prefixes are "http", "https" and "mailto". If your website uses other URL prefixes, you can add them to the allowed link schemes. A link scheme is everything that comes before the colon (:) in a URL (https://www.gxsoftware.com, for example). To add a link scheme, follow these steps:
  1. Enter the link scheme in the text field next to the [Add value] button.
  2. Click [Add value]. The link scheme is added.

To delete a link scheme, follow these steps:
  1. Select the "Delete" check box to the right of the link scheme.
  2. Scroll to the bottom of the "General" tab and click [Save Changes]. The link scheme is deleted.

When you add or delete a link scheme, the change is effective immediately. No restart of XperienCentral or refresh of a browser is necessary.


System Administrators and Application Managers: In general, it is a good idea to communicate to your users of XperienCentral which link schemes are acceptable.

www_root_directorySpecifies the www root directory.


Back to top


wmasolrsearch


PropertyDescription
clearrestSpecifies whether to clear all "remaining URLs" from the search index. This means that all results not indexed in the current run will be removed. Use this option only if fullindex is also enabled.
config_directory

Specifies the name of the directory where the Solr search directories are located.

Note: You can override the default XperienCentral Solr configuration. Perform the following steps in order for the modifications to the Solr configuration files to be applied and saved:

  1. Start XperienCentral.
  2. Create a new directory for the Solr configuration files.
  3. Copy the directory <xperiencentral-root>/work/searchengine/conf/core0/conf to the directory you created in the previous step.
  4. Modify the configuration file(s) as desired in the new directory.
  5. Add the Solr directory that you created above to the property "config_directory" in the "wmasolrsearch" section (above).
  6. Click [Save Changes] in the Setup Tool.
  7. In the XperienCentral Workspace, navigate to the Plugins dialog (Configuration > Plugins).
  8. Stop and restart the plugin "wmasolrsearch".

If after performing the steps above you modify the override configuration files in the directory set as config_directory, you must perform the following steps for them to take effect:

  1. Modify the configuration file(s) as desired in the config_directory.
  2. In the XperienCentral Workspace, navigate to the Plugins dialog (Configuration > Plugins).
  3. Stop and restart the plugin "wmasolrsearch".
crontabscheduleThe Crontab schedule that dictates when the search index will be generated. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning.For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
fullindexSpecifies whether to generate the entire index instead of just the pages that have been added/changed. If clearrest is enabled, enable this option as well.



Back to top


wmaxmfapi


PropertyDescription
db_cleanup_delete_after_x_daysDeletes records from wmaxmf_indicatorvalues that are at least x days old.
db_cleanup_job_cronexpressionThe Crontab schedule that specifies when the database cleanup job runs. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning.For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.
exclude_url_paths

Requests containing these URL paths are not executed. To add a path, enter a string in the field and click [Add value].

log_measurementsSpecifies whether to write measurements to the log.
measurement_job_cronexpressionThe Crontab schedule for the XMF measurements tasks. The Crontab schedule used is a variant of the standard UNIX Crontab scheduler with a "seconds" field prefixed to the beginning.For complete information on scheduling jobs in XperienCentral, see Scheduling Jobs.


24718468


wmpuserprofilesformlogic_set


PropertyDescription
confirmation_code_valid_for_number_of_daysDetermines how long (in days) a user confirmation code is valid.
confirmation_requiredSpecifies whether a confirmation code is required.
exclude_profile_provider_from_generic_processing

Specifies which profile provider(s) are to be exluded from generic processing. To add a provider, enter a string in the field and click [Add value].


24718468






Related content